Firstly, I apologize for the bad pictures. I didn't take the time to make great pictures, as I had to wrap it and get out the door rather quickly. However, it fits the theme of our Bitten By the Bug2 challenge for the next two weeks, which is "Celebrating an Anniversary".
I had this project in mind for a long time, and was on the lookout for a large hurricane lamp at the home décor stores. I got this one from a home stager, I am actually surprised she sold it to me. It is about 20 inches tall. I purchased Armor Etch for this project, I had never used it before, so was a little anxious, not wanting to ruin the lamp. In fact, I waited too long and then had to do a rush job to get in done in time for delivery. I do like the results, so my confidence has grown for the next project. BTW, that Armor Etch is expensive, so use your coupon! I watched a few YouTube videos just to ensure I knew all the tricks.
One side is the names and date they were married, and the other side says "50th Anniversary". It's always hard to get a present for someone who has everything. It's for my husband's brother and his wife who married very young. (and my husband was 10 years younger).
Join in the Bitten by the Bug2 challenge (by using your Cricut machine) and enter our "Celebrating an Anniversary" related card, layout or project using our LINKY.
Cartridges Used:
Free Heart
Anniversary: I think from Heritage
Fonts: Hathaway, Ashlyns Alphabet, Magnolia Sky (downloaded)
Showing posts with label Altered Art. Show all posts
Showing posts with label Altered Art. Show all posts
Monday, November 11, 2019
Monday, October 28, 2019
BBTB2: Cricut - Celebrate Fall Wall Decor
Hello Followers,
Today I have a home décor project that I am really happy to display out on my porch. Can you believe this white board was actually a door off an old bathroom vanity? I did have to strategically place my flowers to hide the holes from the knob and a gouge.
My flowers are mostly from Walmart (98 cents), and I had the vinyl for a few years, so this project only cost a few bucks. I spritzed the door with spray inks, but because the door is similar in texture to vinyl, the ink did not infuse. So when it dried, I put a clear coat of sealer on top. I edited the image from Design Space and separated the two words and sliced out the leaves from image. The transfer to the door went smoothly and quickly. I hot glued on the artificial flowers and a ribbon left over from a gift.
I am the hostess this week at Bitten by the Bug2, and I have selected "Fall Holidays - Anything Goes" as the theme for the next two weeks. I would love to see what you create, you can link up your card, layout or project HERE.
also entered at Die Cutting Diva's - Anything Goes #44
Cartridge:
Fall Sweet Fall
Today I have a home décor project that I am really happy to display out on my porch. Can you believe this white board was actually a door off an old bathroom vanity? I did have to strategically place my flowers to hide the holes from the knob and a gouge.
My flowers are mostly from Walmart (98 cents), and I had the vinyl for a few years, so this project only cost a few bucks. I spritzed the door with spray inks, but because the door is similar in texture to vinyl, the ink did not infuse. So when it dried, I put a clear coat of sealer on top. I edited the image from Design Space and separated the two words and sliced out the leaves from image. The transfer to the door went smoothly and quickly. I hot glued on the artificial flowers and a ribbon left over from a gift.
I am the hostess this week at Bitten by the Bug2, and I have selected "Fall Holidays - Anything Goes" as the theme for the next two weeks. I would love to see what you create, you can link up your card, layout or project HERE.
also entered at Die Cutting Diva's - Anything Goes #44
Cartridge:
Fall Sweet Fall
Monday, October 14, 2019
BBTB2: Cricut - Halloween Witch's Hat Makeover
A few years ago I posted this witch's hat on the Bitten by the Bug2 Blog. That was back before I had my Explore and just worked from cartridges. So I decided it needed a little sprucing up. More is better, right? So I added the back images, sprayed it with ink, added a spider web and dangling spider and more. It's pumpkin time at Bitten by the Bug2, and this does have a print and cut pumpkin on the back so it qualifies for the challenge for the next two weeks. Show us your pumpkins by linking up your project HERE.
I have also added a picture of the original hat so you can see the differences. There are too many cartridges and embellishments to name, so just have a look but don't get scared away.
I have also added a picture of the original hat so you can see the differences. There are too many cartridges and embellishments to name, so just have a look but don't get scared away.
Here is the original version.
Monday, May 21, 2018
BBTB2: Cricut - Isn't She Lovely?
Here's a little unique layout for your enjoyment today. I did not use background paper, I printed a 12"x12" photo of my granddaughter to use as the 'paper'. I knew I wanted to put flowers and maybe a saying in the upper right hand corner, and when the Bitten by the Bug2 challenge came up with the theme of flowers, I knew I had a match. It's a really easy addition to the photo, the picture has to be the star this week, not my Cricut cuts. I cut an oval with the word 'love' in it, but it just didn't look right.
Join our inspiring team of designers, lead by Caroline from Card Creations by Caroline, who have posted great designs for you this week and link up your 'flower' inspired Cricut project to our Bitten by the Bug2 blog HERE:
Cartridge Used:
All flowers and leaves: Bohemian Wedding
Leaves are cut and outlined with Pen feature
Framed in a 12x12 frame that I change out periodically
Join our inspiring team of designers, lead by Caroline from Card Creations by Caroline, who have posted great designs for you this week and link up your 'flower' inspired Cricut project to our Bitten by the Bug2 blog HERE:
Cartridge Used:
All flowers and leaves: Bohemian Wedding
Leaves are cut and outlined with Pen feature
Framed in a 12x12 frame that I change out periodically
Monday, April 16, 2018
BBTB2: Cricut - Shirley's Craft Cottage Wooden Sign
My daughter's aunt by marriage sends the grandkids lots of homemade items and crafts. She is a really special great aunt. She even has an Etsy shop where she sells jewelry called ShirleyHawkCreations. I have a few pieces and get lots of compliments. I created a few signs in the last few weeks and wanted to share this one too. I used a free SVG from a blog I saw on Pinterest (where else?) called "A Girl and a Glue Gun.com". The SVG originally said "crafting is life", but I was able to reword it and put in "Shirley's Craft Cottage" using Cricut's Brush Script. I want to use this file again and make myself a t-shirt.
The SVG was one color, and that just would not do. Here is what I did. I cut a piece of redwood to about 7.5" x 9.5" (fence board is 7.5" wide, that was my limit). I lightly sanded the rough parts, painted it turquoise, and let it dry. Then I cut the SVG on my Cricut in vinyl (not mirrored). I applied the vinyl using transfer tape. I then painted the board white. After it was almost dry, I peeled off the vinyl. Little bits of the turquoise came off, but that added to the charm. I then sanded the edges and lightly in the middle to give an aged effect. I watered down acrylic paints and filled in with color. After that dried, I then gave the entire piece a coating of washed light brown. I really like how it turned out and I think this crafty friend will also. .
I'm using this project as my design team entry for Bitten By the Bug2 this week. Our challenge is to be creative with our die cuts - use them in unique ways, use embellishments on them, color them up, etc., almost anything goes. Link up your project HERE at BBTB2. Our talented hostess for the week is Laura from Handmade Papercrafts By Laura.
.
The SVG was one color, and that just would not do. Here is what I did. I cut a piece of redwood to about 7.5" x 9.5" (fence board is 7.5" wide, that was my limit). I lightly sanded the rough parts, painted it turquoise, and let it dry. Then I cut the SVG on my Cricut in vinyl (not mirrored). I applied the vinyl using transfer tape. I then painted the board white. After it was almost dry, I peeled off the vinyl. Little bits of the turquoise came off, but that added to the charm. I then sanded the edges and lightly in the middle to give an aged effect. I watered down acrylic paints and filled in with color. After that dried, I then gave the entire piece a coating of washed light brown. I really like how it turned out and I think this crafty friend will also. .
I'm using this project as my design team entry for Bitten By the Bug2 this week. Our challenge is to be creative with our die cuts - use them in unique ways, use embellishments on them, color them up, etc., almost anything goes. Link up your project HERE at BBTB2. Our talented hostess for the week is Laura from Handmade Papercrafts By Laura.
Monday, October 23, 2017
BBTB2: Cricut - Happy Halloween to my Mummy
Goblins, Ghosts, and Witches, all looking keen,
My oh my, It's almost Halloween!
Our challenge this week is Ghouls, Monsters, and Ghosts,
Here is my card for all to view, and over at the BBTB2 blog I am the host.
So make a card, project or layout to share,
Link it up to our Bitten by the Bug2 Blog if you Dare!
Make a link back to your blog or Pinterest,
Yours might be the one we select as the BEST!
Happy Halloween Everyone!
October 31st (modified) - Teresa Collins - Chic and Scary
Mummy - (colored and inked) - Happy Hauntings
BEWARE - Happy Hauntings
I sent off this card to a long time friend that loves Halloween. She decorates her whole house and front yard with hundreds of new and vintage Halloween decor. Along with the card I sent 3 fabric pumpkins. The same fabric was used to cover her vintage table and chairs (I helped with that project). The pumpkin in the picture was grown by my son - 121 lbs, his biggest ever! And the flowers are a gift from my sister.
Stems are from old pumpkins found at the pumpkin patch. I added ribbon, moss, and $1 Store flower stems taken apart.
Monday, July 3, 2017
BBTB2: Cricut Stars and Swirls All Around
It's July!!! It's nearly halfway through the year and I am yet to cross off more things from my to do list than what I have added. I have been working on it, in fact got a few things done these past few months. They include a lot of work on the backyard (it needed it after 4 years of drought), curtains and pillow for the RV, working on a 3000 piece quilt, cleaning my craft room (for the 100th time), a good vegetable garden, a fairy garden for granddaughter and small one for me, and a trip to China. Still lots more to get done this summer, including the downstairs bathroom vanity, wallpaper, fixtures replacements, more yard work, and a trip to see friends in another state.
I made this metal serving tray for a friend's birthday a few weeks ago. I got the idea because she actually has a very similar tattoo on her arm of the stars and swirls. I added the INSPIRE as my touch. She really liked it. Her new house has a small patio and she plans on putting it out for display this summer. It really looks like it could be used for a 4th of July party decoration, just add red cups, and blue napkins!
Our challenge this week at Bitten By the Bug2 is "patriotic" or 'red, white, and blue'. It was chosen by Emily from Mollie's Motif blog. Come see the layouts cards, and projects created by the design team - you'll see fireworks for sure! Happy 4th of July USA! Link up your patriotic card or project today!
Vinyl - From Expressions Vinyl
Star and Swirl - from internet - free SVG
Red stars - Free Cricut image
INSPIRE - Botanicals cartridge
Tray - purchased a bunch of these last year at Walmart
I made this metal serving tray for a friend's birthday a few weeks ago. I got the idea because she actually has a very similar tattoo on her arm of the stars and swirls. I added the INSPIRE as my touch. She really liked it. Her new house has a small patio and she plans on putting it out for display this summer. It really looks like it could be used for a 4th of July party decoration, just add red cups, and blue napkins!
Our challenge this week at Bitten By the Bug2 is "patriotic" or 'red, white, and blue'. It was chosen by Emily from Mollie's Motif blog. Come see the layouts cards, and projects created by the design team - you'll see fireworks for sure! Happy 4th of July USA! Link up your patriotic card or project today!
Vinyl - From Expressions Vinyl
Star and Swirl - from internet - free SVG
Red stars - Free Cricut image
INSPIRE - Botanicals cartridge
Tray - purchased a bunch of these last year at Walmart
Monday, June 5, 2017
BBTB2: Be a Mermaid Tag Using Gelli Plate and Cricut
It's Summertime at Bitten By the Bug2. Our 'hot' challenge this week is to show us your summer-themed cards and projects. Link them up to our blog and show us what Cricut projects remind you of summer.
When I think of retreats and mermaids, my mind goes to the beach. Our group of crafty girls got together last year for our 6th annual retreat. We were at Dillon Beach, in Northern California where we rented a house with a great view of the ocean. We had a large living room area which we cleared out and put in our tables and chairs so we could craft all weekend. We made quite a mess - we all bring at least 4 tote bags of supplies and paper - it's amazing.
These are the tags that I created for the event. I used the 'Mermaid Iron-on' icon for the saying and added words using the Easton font. I then used the 'Print then Cut' feature to print on plain paper and glued it to my tag. The Mermaid saying is "always be yourself, unless you can be a mermaid. then always be a mermaid." The painting on the tag was done using a Gelli plate with a template I created from the Scallop Pattern on the Mermaid Party cartridge. I first used a turquoise blue print and then a slight bit of white to top it off - it was supposed to resemble ocean waves. I really loved how it turned out. I also attached a second tag that had rick rack wound around it as part of the swag items. I really liked working 'out of the box' on this one.
Have a Great Summer Everyone!
Linked to the Hiding in My Craft Room Challenge - #303 - Summer
Linked to the Simon Says Stamp Wednesday Challenge
When I think of retreats and mermaids, my mind goes to the beach. Our group of crafty girls got together last year for our 6th annual retreat. We were at Dillon Beach, in Northern California where we rented a house with a great view of the ocean. We had a large living room area which we cleared out and put in our tables and chairs so we could craft all weekend. We made quite a mess - we all bring at least 4 tote bags of supplies and paper - it's amazing.
These are the tags that I created for the event. I used the 'Mermaid Iron-on' icon for the saying and added words using the Easton font. I then used the 'Print then Cut' feature to print on plain paper and glued it to my tag. The Mermaid saying is "always be yourself, unless you can be a mermaid. then always be a mermaid." The painting on the tag was done using a Gelli plate with a template I created from the Scallop Pattern on the Mermaid Party cartridge. I first used a turquoise blue print and then a slight bit of white to top it off - it was supposed to resemble ocean waves. I really loved how it turned out. I also attached a second tag that had rick rack wound around it as part of the swag items. I really liked working 'out of the box' on this one.
Have a Great Summer Everyone!
Linked to the Hiding in My Craft Room Challenge - #303 - Summer
Linked to the Simon Says Stamp Wednesday Challenge
Monday, January 30, 2017
BBTB2 - Cricut - LOVE this kid - picture frame
I brought a plain $1 or so wood frame at Walmart and created something a little out of my comfort zone for a friend who just became a grandma. I used my Cricut Explore to make a stencil for the wording "Love this kid" using the "Retro Script" font. The embellishments are ones that I had in my stash for the last several years - a die cut gears (only used a portion) and various buttons and ephemera. The photo that went inside just made the whole project perfect - a baby boy wrapped in his new light blue blanket that had his name on it. I so love it when a project comes together. This is one that I won't be able to replicate again, it's one of a kind.
Join us for this week's challenge over at Bitten By the Bug2, where our theme is Valentine/Love - anything goes. I am sure you have created something that you would love to share that you have created for a loved one. Link it up to BBTB2 HERE.
Join us for this week's challenge over at Bitten By the Bug2, where our theme is Valentine/Love - anything goes. I am sure you have created something that you would love to share that you have created for a loved one. Link it up to BBTB2 HERE.
Monday, February 8, 2016
BBTB2: Cricut Valentines Day Window Pane
Happy Valentines Day! I decorate the house for a lot of holidays, and have a new display this year. This window pane has been used for weddings, birthdays, and now for Valentines Day. Caroline from Card Creations by Caroline is our hostess this week for Bitten By the Bug2 and she picked the challenge of using a Valentine Heart. There were too many to choose from, so I went with a few favorite cuts and added in pictures of the family. This project actually took less time to make than one of my scrapbook layouts.
I U and one of the cutout hearts is from Valentine's Day cartridge, One heart is from Folk Art Festival, the LOVE the Little Things is from Intricate Cut Quotes, and the I Love You Stamp is from Create a Critter. Join us this week at BBTB2 by linking your HEART projects or cards.
This 'Love the little things' took forever to cut, as I used the intricate cardstock setting. That means it cuts everything twice. It did better on the pink background than it did on the red. I left off the solid background since it was going on glass.
I took only the word Valentines from a "Happy Valentines Day" saying and cut off the 's' to make the I LOVE You Valentine.
I
This 'Love the little things' took forever to cut, as I used the intricate cardstock setting. That means it cuts everything twice. It did better on the pink background than it did on the red. I left off the solid background since it was going on glass.
Tuesday, January 29, 2013
Valentines Spool Swap
OK I GIVE UP - IT'S GOING IN SIDEWAYS
Had this one all ready to go for 2 weeks waiting for the challenges for Valentines Day projects.
I have tried 10 times to get this picture to post the right direction, I give up. This was a spool swap that I did on the Cricut message board. I used 3 spools. Yes those are cupcake liners, also used lace, paper, and a heart on a stick from the $1 store. The Cricut cut is Celebrate with Flourish. Added lots of bling in the way of stickles, roses, stick pin, and ribbon/rickrack. I really like how it turned out.
Linking this up to http://heather-bittenbythebug2.blogspot.com/ for a Love is in the Air challenge.
Linking this up to http://exploringcricut.blogspot.com/ for a Be My Valentine challenge.
Labels:
Altered Art,
Artiste,
Celebrate with Flourish,
cricut
Subscribe to:
Posts (Atom)
















